Rated Capacity: ??2N・m,??5kN・m
High torque such as turbines or for marine use Transducer for measurement of high torque levels such as ??2kNm or 5kNm. Small impact from shaft bending or sliding, enabling high accuracy torque measurements. Additionally, this also makes maintenance inspections of brushes and slip rings easy. For measurement, a carrier type dynamic strain amplifier type DPM is recommended.| Model | Rated Capacity |
Maximum ROtational Speed (rpm) |
Angle of Torsion (rated) (Approx.) |
Torsion Spring Constant (Approx.) (Nm/rad) |
Inertia Moment Approx. (kg・m2 ) |
Allowable Thrust Load (Approx.)(N) |
Allowable Axial Load (Approx.)(N) |
Weight (Approx.) |
|---|---|---|---|---|---|---|---|---|
| TP-200KMAB | 2k | 3000 | 0.012rad | 166667 | 160x10-4 | 1500 | 400 | 22kg |
| TP-200KMAB | 2k | 2500 | 0.012rad | 357143 | 210x10-4 | 1500 | 800 | 33kg |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within ??0.2% RO |
| Hysteresis | Within ??0.2% RO |
| Rated Output | 1.5mV/V (3000??m/m)??0.2% |
| (500KMAB:??0.5%) | |
| Environmental Characteristics | |
|---|---|
| Safe Temperature Range | 0 to 60 o C |
| Compensated Temperature Range | 0 to 60 o C |
| Temperature Effect on Zero Balance | Within??0.01% RO/??C |
| (500KMCB: within??0.05%RO/ o C) | |
| Temperature Effect on Output | Within??0.03%/??C (500KMAB: Within??0.05%/??C) |
| Electrical Characteristics | |
|---|---|
| Recommended Excitation Voltage | 1 to 6V AC or DC |
| Input Resistance | 350?? ??0.5% |
| Output Resistance | 350?? ??0.5% |
| Rotation-induced Noise | 12??m/mp-p or less |
| Cable | 4-conductor (0.3mm 2 ) chloroprene shielded cable,10m diameter by 10 m long, terminated with connector plug at both ends |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
|---|---|
| Safe Overload Rating | 120% |
TOP