BPG-A-S
Suitable for high sensitivity measurement of underground water level.
Featuring rated output of 4000??m/m, the BPG-A-S series pore pressure transducers provide a sensitivity twice as high as ordinary units. Thus, they are suitable for precise measurement of underground water level etc. by embedding in a well, etc.
?? High sensitivity (4000??m/m) and high accuracy (??0.5% RO)
?? Excellent temperature characteristics (??0.02% RO/??C)
?? Cone filter attached (possible to replace to a flat filter)
Model |
Rated Capacity |
BPG-A-200KPS |
200kPa |
BPG-A-500KPS |
500kPa |
Nonlinearity |
Within ??0.5% RO |
Hysteresis |
Within ??0.5% RO |
Rated Output |
2 mV/V (4000 ??m/m) ??2% |
Environmental Characteristics |
Safe Temperature Range |
-20 to 70??C (non-freezing) |
Compensated Temperature Range |
-10 to 60??C (non-freezing) |
Temperature Effect on Zero Balance |
Within ??0.02% RO/??C |
Temperature Effect on Output |
Within ??0.02%??C |
Electrical Characteristics |
Input Resistance |
350???1% |
Output Resistance |
350???1% |
Cable |
4-conductor (0.5 mm 2 ) chloroprene shielded cable, |
10 mm diameter by 1 m long, bared at the tip |
(Shield is not connected to the mainframe.) |
Mechanical Properties |
Material |
Stainless steel metallic finish (filter sintered brass metallic finish) |
Water Pressure Resistance of Cable Outlet |
240kPa(200KPS) |
600kPa(500KPS) |
Weight |
Approx. 800g |
Note:10??m flat filter stanless steel only