MAGUS

ABOUT US

PRODUCTS

Compact 6-component Force Transducer

Transducers

Component Force Transducer

Compact 6-component Force Transducer

Overview

Products Used Examples

Key Features

To Ensure Safe Usage

Downloads

Overview

The LFM-A is a 6-component force transducer. It enables simultaneous measurement of 3 components of force (Fx, Fy, Fz) in 3 axial directions and 3 moments (Mx, My, Mz) around the axes.
Rated Capacity: 1kN, 3kN
Diameter: 66mm
Nonlinearity: Within ±0.5% RO

Haptic Control of Robot Arms

LFM-A can be used to measure six component forces (force on three directions and moment around each axis) simultaneously, for use as a haptic sensor. The hollow structure makes it simple to wire to a robot arm. It is also lightweight (compared with other Kyowa products), reducing its impact on whatever is being measured.

To Ensure Safe Usage

Prepare a plate for installing the LFM-A with sufficient strength.

It is recommendable that LFM-A-3KN should be applied on the steel plate whose thickness is more than 10mm.

LFM-A-1KN should be applied on an aluminum alloy board which is not less than 15 mm thick.

If the LFM-A is installed on a low rigid mounting plate, interference may be increased.