ASHT-A
Compact and lightweight measure 3 axes acceleration simultaneously.
* TEDS-installed versions can be manufactured. Inquires are welcome.
?? Measurement from DC is possible
?? 3 acceleration transducers are within the same case, enabling measurement in X, Y, and Z axes.
?? Minimal mutual interference between each axis, enabling high-accuracy measurement.
?? Applicable to the analysis of acceleration in complex vibration phenomena
?? Compact and lightweight
| Model |
Rated Capacity
(Reference Value) |
Frequency Response
(at 23??C ) |
| ASHT-A-100 |
??980.7m/s 2 (??100G) |
DC to 1.2kHz??Sensitivity Deviation:??5% |
| ASHT-A-200 |
??1961m/s 2 (??200G) |
DC to 2.1kHz??Sensitivity Deviation: ??5% |
| ASHT-A-500 |
??4903m/s 2 (??500G) |
DC to 3kHz?? Sensitivity Deviation: ??10% |
| ASHT-A-1K |
??9807m/s 2 (??1000G) |
DC to 5kHz?? Sensitivity Deviation: ??10% |
| Performance |
| Rated Capacity |
See table above |
| Nonlinearity |
Within??0.1% RO |
| Hysteresis |
Within??0.1% RO |
| Rated Output |
0.5mV/V (1000??m/m) ??20% |
| Environmental Characteristics |
| Safe Temperature Range |
-15 to 65??C |
| Compensated Temperature Range |
5 to 40??C |
| Temperature Effect on Zero Balance |
Within ??1%RO/??C |
| Temperature Effect on Output |
Within ??1%/??C |
| Electrical Characteristics |
| Safe Excitation Voltage |
6V AC or DC |
| Recommended Excitation Voltage |
2V AC or DC |
| Input Resistance |
120???8.3% |
| Output Resistance |
120???8.3% |
| Cable |
4-conductor (0.08mm 2 ) vinyl shielded cable diameter 3.2 mm by 5 m long, terminated with connector plugs (3 pieces) |
| (Shield wire is not connected to mainframe.) |
| Mechanical PropertiesConnector |
| Safe Overload Rate |
300% |
| Frequency Response Range |
See table above |
| Transverse Sensitivity |
2% or less |
| Weight |
Approx. 45g (Approx. 420g including cable) |
| Dimensions |
30??38??16mm |