Compact and lightweight Usable at high temperatures up to 150??C
PHF-S-SA2 series strain gage type pressure transducers are usable at up to 150 ??C . Their small-sized design makes pressure measurements possible in limited spaces.| Model Name | Rated Capacity | Natural Frequency (Approx.) |
|---|---|---|
| PHF-S-2MPSA2 | 2MPa | 25kHz |
| PHF-S-5MPSA2 | 5MPa | 50kHz |
| PHF-S-10MPSA2 | 10MPa | 70kHz |
| PHF-S-20MPSA2 | 20MPa | 100kHz |
| Performance | |
|---|---|
| Rated Capacity | Refer to table above |
| Nonlinearity | Within ??0.4% RO (PHF-S-2MPSA2) |
| Within ??0.3% RO (PHF-S-5MPa to 20MPa) | |
| Hysteresis | Within ??0.2%RO |
| Rated Output | 2 mV/V (4000 ??m/m) |
| Environmental Characteristics | |
| Safe Temperature Range | -40 to 170??C (-25 to 80??C with connector plug) |
| Compensated Temperature Range | -40 to 150??C (-25 to 80??C with connector plug) |
| Temperature Effect on Zero Balance | Within ??0.008% RO/??C |
| Temperature Effect on Output | Within ??0.01%/??C |
| Electrical Characteristics | |
| Safe Excitation Voltage | 10V AC or DC |
| Recommended Excitation Voltage | 1 to 5V AC or DC |
| Input Resistance | 350???2% |
| Output Resistance | 350???2% |
| Cable | 4-conductor (0.09 mm 2) fluoroplastic shielded cable, |
| (Shield wire is not connected to mainframe.) | |
| Mechanical PropertiesConnector | |
| Safe Overload Rating | 150% |
| Natural Frequency | Refer to table above |
| Material | Liquid-contact part SUS630 |
| Weight | Approx. 50 g (not including cable) |
| Mounting Screw | R1/8 male |
TOP