PGMC-A
    
    
		    	
		        Compact, lightweight, and high frequency response flush diaphragm type
PGMC-A series pressure transducers adopt a flush diaphragm with the sensing surface of 5.5-mm diameter. Since a high frequency response to low pressure is ensured, they are suitable for pressure measurement requiring quick response or for a complicated piping system where the attaching space is limited.
 
        
    
					* TEDS-installed versions can be manufactured. Inquiries  are welcome.			
    
    
    
    
    
        
    
					
	| Model | Rated Capacity | Natural Frequency (Approx.) | 
     | PGMC-A-200KP | 200kPa | 24kHz | 
     | PGMC-A-500KP | 500kPa | 34kHz | 
     | PGMC-A-1MP | 1MPa | 40kHz | 
	| Performance | 
	| Rated Capacity | See table above | 
	| Nonlinearity | Within??1% RO | 
	| Hysteresis | Within??1% RO | 
	| Repeatability | 0.25 mV/V (500??m/m) or more (PS-05KC/D) | 
	
    | 0.5 mV/V (1000??m/m) or more (PS-1KC/D) | 
	
    | 0.85 mV/V (1700??m/m)??30% (PS-2KC/D) | 
	
    | 1 mV/V (2000??m/m)??20% (PS-5 to 70KC/D) | 
	
    | Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may have a maximum error of ??1%. | 
	| Environmental Characteristics | 
	| Safe Temperature Range | -20 to 70 o C | 
	| Compensated Temperature Range | 0 to 50 o C | 
	| Temperature Effect on Zero Balance | Within??0.8% RO/??C (PS-05KC/D) | 
	| Within??0.4% RO/??C (PS-1KC/D) | 
	| Within??0.3% RO/??C (PS-2KC/D) | 
	| Within??0.2% RO/??C (PS-5 to 70KC/D) | 
	| Temperature Effect on Output | Within??0.3%/??C (PS-05 to 2KC/D) | 
	| Within??0.2%/??C (PS-5to 70KC/D) | 
	| Electrical Characteristics | 
	| Safe Excitation Voltage | 3V AC or DC | 
	| Recommended Excitation Voltage | 1 to 2V AC or DC | 
	| Input Resistance | 350???10% | 
	| Output Resistance | 350???10% | 
	| Cable | Polyurethane coated copper wires, 0.1 mm diameter (0.08 mm diameter with PS-05KD & 1KD) by 5 cm long, soldering finish at each tip
 | 
	| (Shield wire is not connected to mainframe.) | 
	| Mechanical PropertiesConnector | 
	| Safe Overload Rating | 150% (100% with PS-70KC/D M2) | 
	| Materials | Metallic finish | 
	| Weight | Approx. 0.5g??20% (including cable) | 
			 
    
        
    
					Fluoroplastic sealing tape