Compact,High Sensitivity Center Hole Type of 6-component Force Transducers
Enables simultaneous measurement of 3 forces (Fx, Fy, Fz) in 3 axial directions orthogonal to the transducer and 3 moments (Mx, My, Mz) around the axes. An 8-channel measuring instrument amplifies the transducer's 8 output components in strain quantity and calculates 6-component force. In addition, real-time measurement is possible by connecting PC and PCD-300B. (Measurement software PCD-6A is required.)| Model | Rated Capacity | Rated Output | Natural Frequency(Approx.) | Natural Frequency(Approx.) |
|---|---|---|---|---|
| LFM-A-1KN | FX ?? ??1000N FY ?? ??1000N FZ ?? ??1000N MX ?? ??50N・m MY ?? ??50N・m MZ ?? ??25N・m |
FX ?? ??1.5mV/V or more FY ?? ??1.5mV/V or more FZ ?? ??1.8mV/V or more MX ?? ??4.0mV/V or more MY ?? ??4.0mV/V or more MZ ?? ??2.4mV/V or more |
5kHz | 160g |
| LFM-A-3KN | FX ?? ??3000N FY ?? ??3000N FZ ?? ??3000N MX ?? ??100N・m MY ?? ??100N・m MZ ?? ??50N・m |
FX ?? ??1.6mV/V or more FY ?? ??1.6mV/V or more FZ ?? ??1.6mV/V or more MX : ??2.4mV/V or more MY ?? ??2.4mV/V or more MZ ?? ??1.6mV/V or more |
5kHz | 360g |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within ??0.5% RO |
| Hysteresis | Within ??0.5% RO |
| Interference | ??1.5% RO (after correction by interference correction coefficient stated in Calibration Sheet) |
| Rated Output | See table above |
| Environmental Characteristics | |
| Safe Temperature Range | -10 to 70??C (non-condensing) |
| Compensated Temperature Range | Within ??0.05% RO/??C or less |
| Temperature Effect on Zero Balance | Within ??0.05% RO/??C or less |
| Temperature Effect on Output | Within ??0.05%/??C or less |
| Electrical Characteristics | |
| Safe Excitation Voltage | 12V AC or DC |
| Recommended Excitation Voltage | 1 to 5V AC or DC |
| Input/Output Resistance | 350???3% |
| Cable | 4-conductor (0.3 mm 2 ) chloroprene shielded cable, 6.6 mm diameter by 55 cm long, bared at the tip |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
| Mechanical Properties | 150% |
| Material | Main unit LFM-A-1KN: Aluminum (metallic finish) |
| Main unit LFM-A-3KN: SUS (metallic finish) | |
| Cover: Black anodic oxide coating aluminum | |
| Cable holder: Anodic oxide coating aluminum | |
| Weight | See table above (not including cable) |
| Protection Rating | IP40 |
TOP