Compact,Lightweight, Low price, Suitable for Load Distribution Measurement
Compact and lightweight LMR-S-SA2 series load cells can be used by merely putting or bonding on the subject site or setting in a hollow. Major applications include measurement of load distribution by using multiple units, load measurement in pipe making mill or where a measuring site or the weight of load cell itself is limited.| Model | Rated Capacity |
|---|---|
| LMR-S-2KNSA2 | 2kN |
| LMR-S-5KNSA2 | 5kN |
| LMR-S-10KNSA2 | 10kN |
| LMR-S-20KNSA2 | 20kN |
| *Users should be cautioned that operating conditions may adversely affect the stated specifications. | |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within ??1% RO (LMR-S-2KNSA2 to 10KNSA2) Within ??2% RO (LMR-S-20KNSA2) |
| Hysteresis | Within ??1% RO (LMR-S-2KNSA2 to 10KNSA2) Within ??2% RO (LMR-S-20KNSA2) |
| Repeatability | ??1% RO or less |
| Rated Output | 1 mV/V (2000 ??m/m) or more |
| Environmental Characteristics | |
| Safe Temperature Range | -10 to 60??C |
| Compensated Temperature Range | 0 to 50??C |
| Temperature Effect on Zero Balance | Within ??0.05% RO/??C |
| Temperature Effect on Output | Within ??0.05%/??C |
| Electrical Characteristics | |
| Safe Excitation Voltage | 7V AC or DC |
| Recommended Excitation Voltage | 1 to 5V AC or DC |
| Input Resistance | 350???2% |
| Output Resistance | 350???2% |
| Cable | 4-conductor (0.035 mm 2 ) vinyl shielded cable, 1.7 mm diameter by 2 m long, bared at the tip (Shield wire is connected to mainframe.) |
| Mechanical Properties | |
| Safe Overload Rating | 120% |
| Natural Frequency | Approx.50kHz |
| Weight | Approx.25g |
| Material | Stainless steel |
TOP