Compact, Lightweight, Low Price Suitable for Load Distribution Measurement
Ultra-small and lightweight LMB-A series load cells can be used by merely putting or bonding on the subject site or setting in a hollow. (Patent pending)| Model | Rated Capacity | Natural Frequency (Approx.) |
|---|---|---|
| LMB-A-10N | 10N | 32kHz |
| LMB-A-50N | 50N | 40kHz |
| LMB-A-100N | 100N | 47kHz |
| LMB-A-200N | 200N | 59kHz |
| LMB-A-500N | 500N | 37kHz |
| LMB-A-1KN | 1kN | 45kHz |
| LMB-A-2KN | 2kN | 54kHz |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within ??0.5% RO |
| Hysteresis | Within ??0.5% RO |
| Repeatability | Within ??0.3% RO |
| Rated Output | 1.4 mV/V (2800??m/m) or more 0.5 mV/V (1000??m/m) or more (10N) |
| Note : Rated output is sorted to one of the classes divided by every 1% difference in output value to the rated capacity. Since the rated output stated in the Test Data Sheet is the center value of the class, it may have a maximum error of ??0.5%. | |
| ronmental Characteristics | |
| Safe Temperature Range | -10 to 80??C (non-condensing) |
| Compensated Temperature Range | 0 to 70??C (non-condensing) |
| Temperature Effect on Zero Balance | Within ??0.05%RO/??C Within ??0.1%RO/??C (50N) Within ??0.2%RO/??C (10N) |
| Temperature Effect on Output | Within ??0.05%/??C Within ??0.1%/??C (10N) |
| Electrical Characteristics | |
| Safe Excitation Voltage | 7V AC or DC |
| Recommended Excitation Voltage | 1 to 5V AC or DC |
| Input Resistance | 350???2.5% |
| Output Resistance | 350???2.5% |
| Cable | 4-conductor (0.035 mm 2 ) vinyl shielded cable, 1.7 mm diameter by 2 m long, bared at the tip |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
| Safe Overload Rating | 150% |
| Natural Frequency | See table above |
| Material | Stainless steel |
| Weight | LMB-A-10N to 200N: Approx. 1.5 g (not including cable) |
| LMB-A-500N to 2KN: Approx. 6 g (not including cable) | |
| Protection Rating | IP64 |
TOP