TP-M
Possible to Measure 0.2N??m Torque by 15,000rpm at Maximum.
TP-M series high-speed torque transducers can measure torque at a maximum 15000 rpm, and are available with a rated capacity ranging from 0.2 to 5 N・m. An overload prevention stopper avoids large torque generated in motor startup, etc. While all models are the stationary type with mounting legs, these legs can be easily removed. About measurement instruments, carrier-type strain amplifiers, DPM series are recommended.
Overload prevention stopper is provided.
Mounting legs can be removed as required.
Model |
Rated Capacity |
Rated Torsion Angle,
(Approx.) |
Rated Spring Constant,
(Approx.) |
TP-2KCM |
0.2N・m |
0.0098rad |
20.4N??m/rad |
TP-5KCM |
0.5N・m |
0.012rad |
41.7N??m/rad |
TP-10KCM |
1N・m |
0.016rad |
62.5N??m/rad |
TP-20KCM |
2N・m |
0.016rad |
125N??m/rad |
TP-50KCM |
5N・m |
0.015rad |
333N??m/rad |
Performance |
Rated Capacity |
See table above |
Nonlinearity |
Within ??0.2% RO |
Hysteresis |
Within ??0.2% RO |
Rated Output |
0.75 mV/V (1,500??m/m) ??1% (TP-2 & 5KCM) |
1 mV/V (2,000??m/m) ??1% (TP-10KCM) |
1.5 mV/V (3,000??m/m) ??1% (TP-20 & 50KCM) |
Environmental Characteristics |
Safe Temperature Range |
0 to 70 o C |
Compensated Temperature Range |
0 to 60 o C |
Temperature Effect on Zero Balance |
Within??0.02% RO/??C (TP-2 to 10KCM)
Within??0.01% RO/??C (TP-20 & 50KCM) |
Temperature Effect on Output |
Within??0.02%/??C (TP-2 to 10KCM)
Within??0.01%/??C (TP-20 & 50KCM) |
Electrical Characteristics |
Recommended Excitation Voltage |
1 to 4V AC or DC |
Input Resistance |
350?? ??0.5% |
Output Resistance |
350?? ??0.5% |
Cable |
4-conductor (0.3mm 2 ) chloroprene shielded cable,7.6 mm diameter by 5 m long, terminated with connector plug at both ends |
(Shield wire is not connected to mainframe.) |
Mechanical Properties |
Safe Overload Rating |
150% (stopper activates at 150%,critical torque with stopper 150% + 2 N・m) |
Operating Speed |
000 to 15,000 rpm |
Angle of Torsion |
Angle of Torsion |
Torsion Spring Constant |
Angle of Torsion |
oment of Inertia |
Approx.0.35??10 -4 kg・m2 |
Weight |
Approx.1.1 kg |
Dedicated flexible couplings FC-1B/FC-2B
Note : Worn brushes can be replaced for value