AS-TB
Compact and Lightweight Design and Simultaneous Measurement of Accelerations in X, Y, and Z Directions
AS-TA and AS-TB series acceleration transducers have 3 incorporated miniature acceleration transducers to measure simultaneously 3 axial accelerations (front-rear, left-right, and up-down directions). Because of little interference among each axes, these series acceleration transducers enable accurate measurement and be applied to acceleration analysis of complex vibration phenomenon.
* TEDS-installed versions can be manufactured. Inquiries are welcome.
Model |
Rated Capacity
(Reference Value) |
Frequency Response
(at 23??C ) |
AS-10TB |
??98.07m/s 2 (??1G) |
DC to 350Hz Sensitivity Deviation:??5% |
AS-20TB |
??196.1m/s 2 (??1G) |
DC to 500Hz Sensitivity Deviation:??5% |
AS-50TB |
??490.3m/s 2 (??1G) |
DC to 1kHz Sensitivity Deviation: ??5% |
Performance |
Rated Capacity |
See table above |
Nonlinearity |
Within??0.1% RO |
Hysteresis |
Within??0.1% RO |
Rated Output |
0.5 mV/V (1000??m/m) or more |
Environmental Characteristics |
Safe Temperature Range |
-15 to 65??C |
Electrical Characteristics |
Safe Excitation Voltage |
6V AC or DC |
Recommended Excitation Voltage |
1 to 3V AC or DC |
Input Resistance |
120???5% |
Output Resistance |
120???5% |
Cable |
4-conductor (0.08mm 2 ) vinyl shielded cable diameter 3.2mm diameter by 3m long??terminated with connector plugs |
(Shield wire is not connected to mainframe.) |
Mechanical PropertiesConnector |
Safe Overload Rate |
300% (each axis) |
Frequency Response Range |
See table above |
Transverse Sensitivity |
Within ??2% |
Weight |
Approx. 95g (Excluding cable) |