Excellent Reliability, Resolution and Stability
PAG-A series pressure transducers are stable and their sensor part is designed to be highly stable. Also, inert gas is sealed hermetically in sensor part, ensuring excellent reliability and stability for long-term. The built-in amplifier is composed of highly-selected reliable components and be fully tuned to provide high-frequency radio noise resistance. Therefore, PAG-A series achieves reliable, stable, and high noise resistant measurements.| Model | Rated Capacity |
|---|---|
| PAG-2KA | 200kPa |
| Performance | |
|---|---|
| Rated Capacity | 200kPa |
| Nonlinearity | Within??1% RO |
| Hysteresis | Within??0.2% RO |
| Rated Output | 4 to 20 mA |
| Environmental Characteristics | |
| Safe Temperature Range | -20 to 75??C |
| Compensated Temperature Range | -20 to 70??C |
| Temperature Effect on Zero Balance | Within??0.03% RO/??C |
| Temperature Effect on Output | Within??0.01%/ |
| Zero Stability | ??0.5% RO/year |
| Electrical Characteristics | |
| SN Ratio | 60 dB or more |
| Load Resistance | 0 to 500?? |
| Frequency Response (Built-in Amplifier) | DC to 400 Hz +0.5, -3dB |
| Power Supply | 24V DC(21 to 30V), 30 mA or less |
| Cable | 4-conductor (0.3 mm 2 ) chloroprene shielded cable, 7.6 mm diameter by 5 m long, bared at the tip (3-wire) |
| (Shield wire is not connected to mainframe.) | |
| Mechanical PropertiesConnector | |
| Safe Overload Rating(*1) | 150% |
| Materials | Case: SUS (metallic finish), SUS 630 |
| Weight | Approx. 270 g (not including cable) |
| Protection Rating | lP52 |
| Mounting Screw | G3/8, male |
TOP