PG-U
Highly Accurate and Reliable Pressure Transducers
Highly accurate and reliable PG-U series pressure transducers are hermetically sealed with inert gas filled in to enable stable measurement for a long period of time.
Typical applications include pressure measurement of hydraulic or pneumatic cylinder and pressure test of high-pressure water or gas pipe.
?? Hermetically-sealed structure with inert gas filled in
?? Wide range of rated capacities
?? Abundant application achievements
Model |
Rated Capacity |
Natural Frequency(Approx.) |
PG-2KU |
200kPa |
2kHz |
PG-5KU |
500kPa |
4kHz |
PG-10KU |
1MPa |
7kHz |
PG-20KU |
2MPa |
13kHz |
PG-50KU |
5MPa |
21kHz |
PG-100KU |
10MPa |
29kHz |
PG-200KU |
20MPa |
40kHz |
PG-300KU |
30MPa |
45kHz |
PG-500KU |
50MPa |
50kHz |
Performance |
Rated Capacity |
See table above |
Nonlinearity |
Within??0.3% RO (PG-2 to 10KU)
Within ??0.2% RO (PG-20 to 500KU)
|
Hysteresis |
Within??0.3% RO (PG-2 to 10KU)
Within ??0.2% RO (PG-20 to 500KU)
|
Repeatability |
0.1% RO or less |
Rated Output |
2 mV/V (4000??m/m) ??0.5%(??1% with PG-2 to 10KU) |
Environmental Characteristics |
Safe Temperature Range |
-20 to 70??C |
Compensated Temperature Range |
-10 to 60??C |
Temperature Effect on Zero Balance |
Within??0.02% RO/??C |
Temperature Effect on Output |
Within??0.02%/??C |
Electrical Characteristics |
Safe Excitation Voltage |
15V AC or DC |
Recommended Excitation Voltage |
1 to 10V AC or DC |
Input Resistance |
350???1% |
Output Resistance |
350???1% |
Cable |
4-conductor (0.3 mm 2 ) chloroprene shielded cable,
7.6 mm diameter by 3 m long, terminated with connector plug |
(Shield wire is not connected to mainframe.) |
Mechanical Properties |
Safe Overload Rating |
150% |
Natural Frequency |
See table above |
Material |
Case : Anode oxide coated aluminum (PG-2 & 5KU) |
ZDC (chrome-plated) (PG-10 to 500KU) |
Liquid-contacting part: SUS 630 |
Weight |
Approx. 300 g (Approx. 500 g with PG-2KU & 5KU) (not including cable) |
Mounting Screw |
G3/8, male |
Gasket (leather)
* Do not use PG-200KU to PG-500KU for endurance/fatigue tests.
* Avoid using for a long-term measurement of gas pressure if much importance is attached to the stability of output in a minute range. For such application, we can manufacture models with no air vent.