LUX-B-ID
Suitable for Measuring and Controlling Loads Applied to Small-Scale Presses and Press-Fitting Devices
Compact and lightweight design with a screw-shape
load receiving portion facilitates easy installation to
equipment. Furthermore, the cable is connected using
a connector, therefore there are no problems with
wiring when situating, and cable replacement is easy.
Work is also possible if the cable is replaced with one
resistant to repeated bending (flexible cable). Please
add M1Z3K to the end of the model name.
?? High sensitivity
?? Waterproof connector
?? Stainless steel
?? Easy installation
Note:For transducers providing both positive and negative outputs,
an average of both outputs is writen as the rated output
Model |
Rated Capacity |
Natural Frequency (Approx.) |
*Recommended Tightening Torque (N.m)
|
LUX-B-50N-ID |
??50N |
8kHz |
3N・m |
LUX-B-100N-ID |
??100N |
11kHz |
LUX-B-200N-ID |
??200N |
14kHz |
LUX-B-500N-ID |
??500N |
16kHz |
10N・m |
LUX-B-1KN-ID |
??1kN |
21kHz |
LUX-B-2KN-ID |
??2kN |
27kHz |
LUX-B-5KN-ID |
??5kN |
18kHz |
80N・m |
LUX-B-10KN-ID |
??10kN |
21kHz |
LUX-B-20KN-ID |
??20kN |
25kHz |
Performance |
Rated Capacity |
See table above |
Nonlinearity |
Within ??0.15% RO (LUX-B-50N to 2KN)
Within ??0.1% RO (LUX-B-5KN to 20KN)
|
Hysteresis |
Within ??0.15% RO (LUX-B-50N to 2KN)
Within ??0.1% RO (LUX-B-5KN to 20KN)
|
Repeatability |
0.05% RO or less |
Rated Output |
??0.85mV/V (??1700??m/m) or more (LUX-B-50)
??0.9mV/V (??1800??m/m) or more (LUX-B-100N to 1KN)
??1.3mV/V (??1900??m/m) or more (LUX-B-2KN to 20KN) |
Environmental Characteristics |
Safe Temperature Range |
-20 to 80??C |
Compensated Temperature Range |
-10 to 70??C |
Temperature Effect on Zero Balance |
Within ??0.03% RO/??C (LUX-B-50N to 200N)
Within ??0.005% RO/??C (LUX-B-500N to 20KN) |
Temperature Effect on Output |
Within ??0.005%/??C |
Electrical Characteristics |
Safe Excitation Voltage |
10V AC or DC (LUX-B-50N to 200N)
15V AC or DC (LUX-B-500N to 20KN) |
Recommended Excitation Voltage |
1 to 5V AC or DC (LUX-B-50N to 200N)
1 to 10V AC or DC (LUX-B-500N to 20KN) |
Input Resistance |
375???1.5% |
Output Resistance |
350???1% |
Cable |
4-conductor (0.3 mm 2 ) chloroprene shielded cable,
4mm diameter by 3m long, with connector plug to mainframe side,and bared to amplifier side |
(Shield wire is not connected to mainframe.) |
Mechanical Properties |
Safe Overload Rating |
150% |
Natural Frequency |
See table above |
Material |
SUS (metallic finish) |
Weight |
Approx. 0.05kg (LUX-B-50N to 200N)
Approx. 0.1kg (LUX-B-500N to 2KN)
Approx. 0.3kg (LUX-B-5KN to 20KN) (not including cable) |
Protection Rating |
IP67 (Watertight type conforming to JIS 0920) |