Suited for Weighing in Food Processing or Where they are Exposed to Corrosive Liquids or Gases.
The hermetically-sealed stainless steel structure with inert gas filled in enables use for weighing in food processing or where they are exposed to corrosive liquids or gases. The high overload rating minimizes the ratio of breakdown due to overload.| Model | Rated Capacity | Natural Frequency (Approx.) |
Weight (Approx.) |
|---|---|---|---|
| LC-500KJ | 5kN | 5.2kHz | 3kg |
| LC-1TJ | 10kN | 6kHz | |
| LC-2TJ | 20kN | 5.8kHz | |
| LC-5TJ | 50kN | 5.7kHz | |
| LC-10TJ | 100kN | 5.5kHz | 5kg |
| LC-20TJ | 200kN | 6kHz | 6kg |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within??0.5% RO |
| Hysteresis | Within??0.2% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | 1 mV/V (2000??m/m) ??0.2% |
| Environmental Characteristics | |
| Safe Temperature Range | -30 to 85??C |
| Compensated Temperature Range | -10 to 70??C |
| Temperature Effect on Zero Balance | Within??0.005% RO/??C |
| Temperature Effect on Output | Within??0.005%/??C |
| Electrical Characteristics | |
| Safe Excitation Voltage | 20V AC or DC |
| Recommended Excitation Voltage | 1 to 12V AC or DC |
| Input Resistance | 350???0.5% |
| Output Resistance | 350???0.5% |
| Cable | 4-conductor (0.3 mm 2 ) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with connector plug |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
| Safe Overload Rating | 400% |
| Natural Frequency | See table above |
| Weight | See table above |
TOP