LCTS-B
Developed for Weighing Hoppers
and Tanks, LCTS-B Series is a
Stainless Steel Compression Load
Cells with Built-In Steady Brace
Mechanism.
?? Stainless steel structure enables use under conditions
where the load cell is exposed to moisture and corrosive gases.
?? "Thin" and "Top and Bottom plates integrated" design facilitates installation
to hopper brackets or tank's feet.
?? Hermetically-sealed structure (protection rating IP67)
?? Built-in steady brace mechanism makes LCTS-B suitable for weighing stirring tanks or tanks with feet,
while simplifying peripheral facilities by eliminating check rod, etc.
?? Since the load cell can be fixed with bolts, dropping or floating of the load cell can be prevented.
Model |
Rated Capacity |
Natural Frequency
(Approx.) |
Weight
(Approx.) |
LC-500KJ |
5kN |
5.2kHz |
3kg |
LC-1TJ |
10kN |
6kHz |
LC-2TJ |
20kN |
5.8kHz |
LC-5TJ |
50kN |
5.7kHz |
LC-10TJ |
100kN |
5.5kHz |
5kg |
LC-20TJ |
200kN |
6kHz |
6kg |
Performance |
Rated Capacity |
See table above |
Nonlinearity |
Within??0.5% RO |
Hysteresis |
Within??0.2% RO |
Repeatability |
0.1% RO or less |
Rated Output |
1 mV/V (2000??m/m) ??0.2% |
Environmental Characteristics |
Safe Temperature Range |
-30 to 85??C |
Compensated Temperature Range |
-10 to 70??C |
Temperature Effect on Zero Balance |
Within??0.005% RO/??C |
Temperature Effect on Output |
Within??0.005%/??C |
Electrical Characteristics |
Safe Excitation Voltage |
20V AC or DC |
Recommended Excitation Voltage |
1 to 12V AC or DC |
Input Resistance |
350???0.5% |
Output Resistance |
350???0.5% |
Cable |
4-conductor (0.3 mm 2 ) chloroprene shielded cable,
7.6 mm diameter by 5 m long, terminated with connector plug |
(Shield wire is not connected to mainframe.) |
Mechanical Properties |
Safe Overload Rating |
400% |
Natural Frequency |
See table above |
Weight |
See table above |