Compact, Lightweight, Low Price Suitable for Load Distribution Measurement
Compact and lightweight LMA-A series load cells can be used by merely putting or bonding on the measurement point or setting in a hollow.| Model | Rated Capacity |
Natural Frequency (Approx.) |
Weight (Approx.)*1 |
Mount Base |
|---|---|---|---|---|
| LMA-A-5N | 5N | 15.3kHz | 1.5g | CFM-5A |
| LMA-A-10N | 10N | 17.5kHz | ||
| LMA-A-20N | 20N | 24.8kHz | ||
| LMA-A-50N | 50N | 32.6kHz | ||
| LMA-A-100N | 100N | 21.6kHz | 11g | CFM-100A |
| LMA-A-200N | 200N | 29.7kHz | ||
| LMA-A-500N | 500N | 43.9kHz | ||
| LMA-A-1KN | 1kN | 53kHz |
| Performance | |
|---|---|
| Rated Capacity | See table above |
| Nonlinearity | Within ??1% RO |
| Hysteresis | Within ??1% RO |
| Repeatability | 1% RO or less |
| Rated Output | 0.6 to 2 mV/V (1200 to 4000 ??m/m) (LMA-A-5N) 0.75 to 2 mV/V (1500 to 4000 ??m/m) (LMA-A-10N to 1KN) |
| Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may have a maximum error of ??1%. | |
| Environmental Characteristics | |
| Safe Temperature Range | -10 to 60??C (however, noncondensing) |
| Compensated Temperature Range | 0 to 50??C (however, noncondensing) |
| Temperature Effect on Zero Balance | Within ??0.3% RO/??C (LMA-A-5N) Within ??0.2% RO/??C (LMA-A-10N to 50N) Within ??0.05% RO/??C (LMA-A-100N to 1KN) |
| Temperature Effect on Output | Within ??0.2%/??C (LMA-A-5N to 50N) Within ??0.05%/??C (LMA-A-100N to 1KN) |
| Electrical Characteristics | |
| Safe Excitation Voltage | 7V AC or DC |
| Recommended Excitation Voltage | 1 to 5 VAC or DC |
| Input Resistance | 350???2.5% |
| Output Resistance | 350???2.5% |
| Cable | 4-conductor (0.035 mm 2 ) vinyl shielded cable, 1.7 mm diameter by 2 m long, bared at the tip |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
| Safe Overload Rating | 150% |
| Natural Frequency | See table above |
| Weight | See table above |
| Material | Copper alloy (LMA-A-5N to 50N) Stainless steel (LMA-A-100N to 1KN) |
TOP